Synthetic Varnish
Anasayfa >> Synthetic Group >> Synthetic Varnish

Synthetic Varnish

Become Visitor
Become Exhibitor

Synthetic yacht varnish is a long oil alkyd resin based, single component, air drying, resistant to external effects, transparent and glossy top coat varnish. It is used for both protective and decorative purposes on wooden surfaces. It provides maximum protection in wooden applications that remain in the outdoor environment such as sea vehicles, exterior joinery, pergolas, tables, chairs. It has high UV resistance and is resistant to yellowing.

Features

  • High gloss and depth effect
  • Resistant to water, moisture and sunlight
  • Resistant to UV rays – does not yellow or crack
  • Adapts to the work of the wood thanks to its elastic structure
  • Single component and easy to apply with brush/roller
  • Provides water repellent properties – protection against sea and rain
  • Perfect adhesion between layers

Features

  • High gloss and depth effect
  • Resistant to water, moisture and sunlight
  • Resistant to UV rays – does not yellow or crack
  • Adapts to the work of the wood thanks to its elastic structure
  • Single component and easy to apply with brush/roller
  • Provides water repellent properties – protection against sea and rain effects
  • Perfect adhesion between layers

Application Area

  • Wooden surfaces of yachts, boats and marine vehicles
  • Exterior cladding, wooden joinery
  • Garden furniture, pergolas, arbors, benches and tables
  • Indoors wood surfaces where high gloss and protection is desired
  • Hard and softwood species

Surface Preparation and Application Method

The surface must be dry, clean, sanded and completely free of dust and oil. If there is old varnish, it should be completely scraped off or roughened with matt sandpaper.

Thinning Ratio:

  • For brush/roller 5 – 10%
  • For gun 15 – 20% thinned with synthetic thinner

Application Instructions:

  • Can be applied in 2–3 coats
  • Waiting time between coats: 16 – 24 hours
  • Light sanding (320–400 grit) is recommended between coats
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm

Area that can be covered

Approximately 10 – 12 m² surface can be covered (depending on 30 – 40 micron dry film thickness).

Drying Time (23°C / 50% RH)

  • Dust-proof: 2 – 3 hours
  • Touch dry: 6 – 8 hours
  • Full dry: 24 hours
  • Outdoor resistance and maximum hardness: 5 – 7 days

Packaging

  • 0.75 L – 2.5 L – 5 L – 10 L – 20 L metal containers

Storage

  • Storage should be stored in its original packaging, in a cool and dry place (between +5°C and +30°C)
  • Protect from freezing and direct sunlight
  • Shelf life: 12 months (unopened products)

Hazard Warnings

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause dry skin and dizziness may be

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from open fire, no smoking
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Wooden surfaces of yachts, boats and marine vehicles
  • Exterior cladding, wooden joinery
  • Garden furniture, pergolas, arbors, benches and tables
  • Wood surfaces where high gloss and protection are required in interior spaces
  • Hard and softwood species

Application Instructions

  • Can be applied in 2–3 coats
  • Waiting time between coats: 16 – 24 hours
  • Light sanding (320–400 grit) is recommended between coats
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm

Surface Preparation and Application Method

The surface must be dry, clean, sanded and completely free of dust and oil. If there is old varnish, it should be completely scraped off or roughened with matt sandpaper.

Thinning Rate

  • For brush/roller, 5 – 10%
  • For gun, 15 – 20% is thinned with Synthetic Thinner

Area That Can Be Covered

Approximately 10 – 12 m² of surface can be covered with 1 liter (according to 30 – 40 micron dry film thickness).

Drying Time (23°C / 50% relative humidity)

  • Does not collect dust: 2 – 3 hours
  • Touch dry: 6 – 8 hours
  • Full dry: 24 hours
  • Outdoor resistance and maximum hardness: 5 – 7 days