Application Area

• Wooden furniture and decorative surfaces
• MDF and chipboard coatings
• Metal surfaces (doors, railings, furniture surfaces)
• Surfaces painted with synthetic systems
• Concrete and plastered surfaces (after suitable primer)
• Indoor coating and final coat protection processes

Features

• Matte, homogeneous and natural surface appearance (5–15% gloss)
• Air drying – single component system
• High adhesion and protection to the surface
• Can be applied with brush, roller or gun
• Resistance to yellowing and cracking
• With cellulosic and alkyd based systems compatible

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and oil-free. If necessary, it must be sanded and a primer must be applied. The substrate must be completely dry.

Thinning Ratio

• Thinned with 10–15% synthetic thinner
• Thinning can be increased to 15–20% in gun applications

Application Instructions

• Can be applied in 1–2 coats with brush, roller or gun
• Waiting time between coats: 16–24 hours
• Gun pressure: 2–2.5 bar
• Nozzle diameter: 1.3–1.5 mm
• Application viscosity: ~50–70 sec / DIN Cup 4 (20°C)

Area Covered

With 1 liter approximately 9 – 11 m² of surface can be covered (depending on 30 – 40 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Dust-proof: 1 – 2 hours
• Touch dry: 4 – 6 hours
• Full dry: 24 hours
• Light mechanical strength: 48 hours

Packaging

1 L – 2.5 L – 5 L – 10 L metal containers

Storage

• Stored in original packaging, in a cool and dry environment between +5°C and +30°C
• Protected from sunlight and freezing
• Shelf life: 12 months (in unopened original packaging)

Hazard Warnings

• R10: Flammable
• R20: Harmful if inhaled
• R36/38: May cause eye and skin irritation
• R66/67: May cause skin dryness and dizziness

Safety Recommendations

• S2: Keep away from children
• S16: Keep away from fire, do not smoke
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear protective clothing, gloves and goggles
• S51: Use only in well-ventilated areas
• S56: Dispose of waste in accordance with environmental legislation

Application Area

• Wooden furniture and decorative surfaces
• MDF and chipboard coatings
• Metal surfaces (doors, railings, furniture surfaces)
• Surfaces painted with synthetic systems
• Concrete and plastered surfaces (after suitable primer)
• Indoor coating and final coat protection processes

Application Instructions

• Can be applied in 1–2 coats with brush, roller or gun
• Waiting time between coats: 16 – 24 hours
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.3 – 1.5 mm
• Application viscosity: ~50–70 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and oil-free. If necessary, it should be sanded and a primer should be applied. The bottom surface must be completely dry.

Thinning Rate

• Thinned with 10-15% Synthetic Thinner
• Thinning can be increased to 15-20% in gun applications

Area That Can Be Covered

• Approximately 9-11 m² of surface can be covered with 1 liter (according to 30-40 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Dust-free: 1-2 hours
• Touch dry: 4-6 hours
• Full dry: 24 hours
• Light mechanical strength: 48 hour