Features

• Contains anti-rust pigment
• Adheres well to the surface
• Any kind of synthetic, oily, cellulosic or polyurethane paint can be applied on it
• Single component and ready to apply
• Can be sanded after drying
• Can be applied with brush, roller or gun
• Balances absorbency on the surface, increases the performance of the final coat of paint

Application Area

• Metal surfaces (iron, steel, sheet metal)
• Wood and MDF surfaces
• Reinforcement iron, steel constructions
• Industrial machinery, doors, windows and railings
• Indoor and outdoor metal parts

Surface Preparation and Application Method

The surface to be applied must be dry, clean and completely cleared of residues such as oil, dirt, rust. If necessary, sandpaper should be applied and loose parts should be scraped off. Resin and dust residues should be cleaned from wooden surfaces.

Dilution Ratio

Dilute with 10 – 15% Synthetic Thinner

Application Instructions

• Can be applied in 1–2 coats with brush, roller or gun
• Waiting time between coats: 12 – 24 hours
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.6 – 1.8 mm
• Application viscosity: ~45–60 sec / DIN Cup 4 (20°C)

Area Coverable

Approximately 8 – 10 m² of surface can be covered with 1 liter (40 – 60 micron dry film thickness (according to)

Drying Time (23°C / 50% RH)

• Dust-proof: 1 – 2 hours
• Touch dry: 4 – 6 hours
• Fully dry: 24 hours
• Suitable for sanding: after 16 – 24 hours

Packaging

1 L – 2.5 L – 5 L – 10 L – 20 L metal containers

Storage

• Stored in a cool and dry environment between +5°C and +30°C
• Protected from direct sunlight and freezing
• Shelf life: 12 months (in original, closed packaging)

Hazard Warnings

• R10: Flammable
• R20: Harmful if inhaled
• R36/38: May cause eye and skin irritation
• R66/67: May cause skin dryness and dizziness

Safety Recommendations

• S2: Keep away from children
• S16: Keep away from fire, do not smoke
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear protective clothing, gloves and goggles
• S51: Use only in well-ventilated areas
• S56: Dispose of waste in accordance with environmental legislation

Application Area

• Metal surfaces (iron, steel, sheet metal)
• Wood and MDF surfaces
• Reinforced iron, steel constructions
• Industrial machinery, doors, windows and railings
• Indoor and outdoor metal parts

Application Instructions

• Can be applied in 1–2 coats with brush, roller or gun
• Waiting time between coats: 12 – 24 hours
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.6 – 1.8 mm
• Application viscosity: ~45–60 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean and completely free of residue such as oil, dirt, and rust. If necessary, sandpaper should be applied and loose parts should be scraped.
Resin and dust residue should be cleaned from wooden surfaces.

Dilution Rate

Diluted with 10 – 15% Synthetic Thinner

Area That Can Be Covered

Approximately 8 – 10 m² of surface can be covered with 1 liter
(According to 40 – 60 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Does not collect dust: 1 – 2 hours
• Touch dry: 4 – 6 hours
• Full dry: 24 hours
• Suitable for sanding: After 16 – 24 hours