Synthetic Glossy Paint
Anasayfa >> Synthetic Group >> Synthetic Glossy Paint

Synthetic Glossy Paint

Become Visitor
Become Exhibitor

Synthetic Glossy Paint is an alkyd resin based, single component, air drying, high gloss top coat paint. It is used to provide an aesthetic and long-lasting appearance on wood, metal and concrete surfaces. It can be easily applied with a brush, roller or gun. It is resistant to external weather conditions and is especially preferred for decorative and protective purposes on indoor and outdoor surfaces.

Features

  • High gloss and smooth surface appearance (%80+ gloss)
  • Resistance to water, moisture and weather conditions
  • Single component, ready to apply
  • Provides long-lasting protection with its hard film structure
  • Spreads smoothly without leaving brush and roller marks
  • Resistant to color fading
  • Provides maximum performance when applied over a primer

Application Area

  • Wooden surfaces (doors, windows, furniture, paneling, etc.)
  • Metal surfaces (iron joinery, railings, machine bodies)
  • Industrial equipment
  • Concrete and plastered surfaces (after suitable primer)
  • Interior and exterior surfaces
  • Decorative applications

Features

  • High gloss and smooth surface appearance (80%+ gloss)
  • Resistance to water, moisture and weather conditions
  • Single component, ready to apply
  • Provides long-lasting protection with its hard film structure
  • Spreads smoothly without leaving brush and roller marks
  • Resistant to color fading
  • On the primer provides maximum performance by applying

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and oil-free. If necessary, sandpaper should be applied and the surface should be primed with Synthetic Primer.

Thinning Rate

  • Diluted with 10–15% Synthetic Thinner
  • 5–10% thinning is suitable for brush/roller and 15–20% thinning for gun

Application Instructions

  • Can be applied in 1–2 coats with brush, roller or gun
  • Waiting time between coats: 16–24 hours
  • Gun pressure: 2–2.5 bar
  • Nozzle diameter: 1.4–1.8 mm
  • Application viscosity: ~60–80 sec / DIN Cup 4 (20°C)

Coversable Area

Approximately 9 – 11 m² of surface can be covered with 1 liter of paint (depending on 30 – 50 micron dry film thickness)

Drying Time (23°C / 50% RH)

  • Dust-proof: 1 – 2 hours
  • Touch dry: 6 – 8 hours
  • Full dry: 24 hours
  • Suitable for sanding: after 24 – 36 hours

Packaging

Provided in 1 L – 2.5 L – 5 L – 10 L – 20 L metal packages

Storage

  • With +5°C Store between +30°C, in a cool and dry environment
  • Should not be exposed to direct sunlight and freezing
  • Shelf life: 12 months (in unopened original packaging)

Hazard Warnings

  • R10: Flammable
  • R20/21: Harmful by inhalation and in contact with skin
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause dry skin and dizziness

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Packaging

1 L – 2.5 L – 5 L – 10 L – 20 L metal packages

Storage

  • Storage should be kept in a cool and dry place between +5°C and +30°C
  • Should not be exposed to direct sunlight and freezing
  • Shelf life: 12 months (in unopened original packaging)

Hazard Warnings

  • R10: Flammable
  • R20/21: Harmful by inhalation and in contact with skin
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness may be

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Wooden surfaces (doors, windows, furniture, paneling, etc.)
  • Metal surfaces (iron joinery, railings, machine bodies)
  • Industrial equipment
  • Concrete and plastered surfaces (after suitable primer)
  • Interior and exterior surfaces
  • Decorative applications

Application Instructions

  • Can be applied with brush, roller or gun in 1–2 coats
  • Waiting time between coats: 16 – 24 hours
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.4 – 1.8 mm
  • Application viscosity: ~60–80 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and oil-free. If necessary, sandpaper should be applied and the surface should be primed with Synthetic Primer.

Thinning Rate

  • Diluted with 10–15% Synthetic Thinner
  • 5–10% thinning is suitable for brush/roller and 15–20% thinning for gun

Area That Can Be Covered

  • Approximately 9–11 m² of surface can be covered with 1 liter of paint
  • (Depending on 30–50 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

  • Dust-proof: 1–2 hours
  • Touch dry: 6–8 hours
  • Full dry: 24 hours
  • Suitable for sanding: after 24 – 36 hours