Polyurethane Producing Top Coat Glossy Paint
Anasayfa >> Polyurethane Group >> Polyurethane Producing Top Coat Glossy Paint

Polyurethane Producing Top Coat Glossy Paint

Become Visitor
Become Exhibitor

Polyurethane Top Coat Glossy Paint (3+1) is a two-component, polyurethane-based top coat paint that provides high gloss, chemical and mechanical resistance. Suitable for use with a 3:1 mixing ratio, this paint creates a surface that is resistant to external factors, UV resistant and scratch resistant. Provides excellent adhesion on metal, MDF, wood and concrete surfaces, spreads smoothly without leaving brush marks.

Features

  • High gloss (85%+ gloss value)
  • Hard and elastic film structure
  • Resistance to UV rays – does not yellow
  • Resistance to chemicals (oil, fuel, cleaning agents)
  • Can be produced with rich color options
  • Provides excellent adhesion on primer and putty
  • Easy and streak-free application with brush or gun

Application Area

  • Automotive body and spare parts painting
  • Industrial machinery, agricultural equipment
  • Wood and MDF furniture surfaces
  • Metal, aluminum and galvanized surfaces
  • Decorative interior/exterior applications
  • Any surface where durability and aesthetics are desired

Surface Preparation and Application Method

The surface to be applied must be dry, clean, sanded and free of dust and oil. If necessary, a smooth surface should be created with Polyurethane Primer.

Packaging

  • 4 kg set (3 kg paint + 1 kg hardener)
  • 12 kg set (9 kg paint + 3 kg hardener)
  • Different packaging combinations can be prepared according to order

Storage

  • Storage should be kept in a dry and cool environment between +5°C and +30°C
  • Protect from direct sunlight and frost
  • Shelf life: 12 months (in closed packaging)

Hazard Warnings

  • R10: Flammable
  • R20/21: Harmful by inhalation and in contact with skin
  • R36/38: Causes eye and skin irritation may cause
  • R66/67: May cause dry skin and dizziness

Safety advice

  • S2: Keep away from children
  • S16: Keep away from fire, no smoking
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Automotive body and spare parts painting
  • Industrial machinery, agricultural equipment
  • Wood and MDF furniture surfaces
  • Metal, aluminum and galvanized surfaces
  • Decorative interior/exterior applications

Application Instructions

  • Can be applied in 2 coats with a gun
  • Waiting time between coats: 10 – 15 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Application viscosity: ~20–25 sec / DIN Cup 4 (20°C)

Mixing Ratio (A + B)

  • 3:1 → 3 parts paint + 1 part polyurethane hardener
  • If necessary, add 5 – 10% Polyurethane Thinner

Area to be Covered

Approximately 8 – 10 m² of surface can be covered with 1 liter of mixture (according to 40 – 50 micron dry film thickness)

Drying Time (23°C / 50% RH)

  • Dust-proof: 15 – 20 minutes
  • Touch dry: 1 – 2 hours
  • Full dry: 8 – 10 hours
  • Final hardness and chemical resistance: 7 days