Industrial Lining
Anasayfa >> Industrial Group >> Industrial Lining

Industrial Lining

Become Visitor
Become Exhibitor

Industrial Rapid Primer is a single component, fast drying primer based on alkyd resin. Developed for industrial painting systems, this product provides high adhesion, anti-corrosion properties and smooth surface preparation especially on metal surfaces. Thanks to its fast drying time, it saves time in the production process and offers the opportunity to switch to the final coat application in a short time.

Features

  • Fast drying and high production efficiency
  • High adhesion and surface covering
  • Corrosion resistance with rust preventive pigment content
  • Single component and easy to apply structure
  • Smooth surface suitable for the final coat of paint to be applied on it
  • Primer surface suitable for sanding

Application Area

  • Industrial type metal constructions
  • Agricultural machinery, construction machinery and equipment
  • Automotive sub-industry parts
  • Iron profiles, sheet metal surfaces
  • Industrial production lines
  • Can also be used on wood and MDF surfaces (depending on surface condition)

Surface Preparation and Application Method

The surface to be applied must be dry, clean and free from residues such as dust, oil, rust. The surface must be sanded and cleaned with a suitable solvent if necessary. The product should be mixed thoroughly before application.

Dilution and Application Ratio:

Dilute with 10 – 20% Rapid Thinner depending on the application viscosity.

Application Instructions:

  • Can be applied in 1–2 coats with a gun
  • Waiting time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.4 – 1.6 mm
  • Application viscosity: ~20–25 sec / DIN Cup 4 (20°C)

Coatable Area

Approximately 8 – 10 m² of area can be covered with 1 liter of product (40 – 50 micron dry film thickness (according to).

Drying Time (23°C / 50% RH)

  • Dust-free: 10 – 15 minutes
  • Touch dry: 20 – 30 minutes
  • Sand dry: 1 – 2 hours
  • Full dry: 4 – 6 hours

Packaging

  • 1 L – 5 L – 10 L – 20 L metal containers

Storage

  • Storage should be kept in its original packaging, between +5°C and +30°C, in a cool and dry environment
  • Protect from direct sunlight and freezing conditions
  • Shelf life: 12 months (under appropriate conditions)

Hazard Warnings

  • R10: Flammable
  • R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness may be

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear suitable protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Industrial metal constructions
  • Agricultural machinery, construction machinery and equipment
  • Automotive sub-industry parts
  • Iron profiles, sheet metal surfaces
  • Industrial production lines
  • Can also be used on wood and MDF surfaces (depending on surface condition)

Application Instructions

  • Can be applied in 1–2 coats with a gun
  • Waiting time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.4 – 1.6 mm
  • Application viscosity: ~20–25 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean and free of dust, oil, rust, etc. The surface must be sanded and cleaned with a suitable solvent if necessary. The product should be mixed thoroughly before application.

Dilution and Application Rate

Dilute with 10 – 20% Rapid Thinner depending on the application viscosity.

Area That Can Be Covered

Approximately 8 – 10 m² of area can be covered with 1 liter of product
(According to 40 – 50 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

  • Dust-free: 10 – 15 minutes
  • Touch dry: 20 – 30 minutes
  • Sand dry: 1 – 2 hours
  • Full dry: 4 – 6 hours