Application Area

• Metal surfaces and metal parts
• Work machines, agricultural machines
• Iron profiles, steel constructions
• Industrial type equipment
• Furniture accessories
• Wood and MDF surfaces (after suitable primer)

Surface Preparation and Application Method

The surface to be applied must be free from dust, dirt, rust, oil and silicone residues. If necessary, the surface should be prepared with a suitable primer (e.g. Rapid Primer). The product should be mixed thoroughly before application.

Dilution and Application Ratio:

• Dilute with 10 – 20% Industrial Thinner depending on the application viscosity.

Application Instructions:

• Can be applied in 1–2 coats with a gun
• Waiting time between coats: 5 – 10 minutes
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.4 – 1.6 mm
• Application viscosity: ~20–25 sec / DIN Cup 4 (20°C)

Coatable Area

• Approximately 8 – 10 m² of surface can be covered with 1 liter of paint (50 – 60 microns dry film thickness)

Drying Time (23°C / 50% RH)

• Dust-proof: 10 – 20 minutes
• Touch dry: 30 – 45 minutes
• Full dry: 6 – 8 hours

Packaging

• 1 L – 5 L – 10 L – 20 L metal containers

Storage

• Storage should be kept in its original packaging, between +5°C and +30°C, in a cool and dry environment
• Protect from direct sunlight and freezing conditions
• Shelf life: 12 months (under appropriate conditions)

Hazard Warnings

• R10: Flammable
• R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
• R36/38: May cause eye and skin irritation
• R66/67: May cause skin dryness and dizziness may be

Safety Recommendations

• S2: Keep away from children
• S16: Keep away from fire, do not smoke
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear suitable protective clothing, gloves and goggles
• S51: Use only in well-ventilated areas
• S56: Dispose of waste in accordance with environmental legislation

Application Area

• Metal surfaces and metal parts
• Work machines, agricultural machines
• Iron profiles, steel constructions
• Industrial type equipment
• Furniture accessories
• Wood and MDF surfaces (after suitable primer)

Application Instructions

• Can be applied in 1–2 coats with a gun
• Waiting time between coats: 5 – 10 minutes
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.4 – 1.6 mm
• Application viscosity: ~20–25 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be free of dust, dirt, rust, oil and silicone residue. If necessary, the surface should be prepared with a suitable primer (e.g. Rapid Primer). The product should be mixed thoroughly before application.

Dilution and Application Rate

Dilute with 10 – 20% Industrial Thinner depending on the application viscosity.

Coversable Area

Approximately 8 – 10 m² of surface can be covered with 1 liter of paint (50 – 60 micron dry film thickness is taken as basis)

Drying Time (23°C / 50% relative humidity)

• Does not collect dust: 10 – 20 minutes
• Touch dry: 30 – 45 minutes
• Full dry: 6 – 8 hours