Features

• High surface hardness – wear and scratch resistance
• Dust-proof, wipeable and hygienic
• UV resistant – anti-yellowing formula
• Resistance to fuel, oil, chemicals and cleaning agents
• Long-lasting, flexible and crack-resistant film
• Glossy, semi-matte or matte surface options
• Can be applied with brush, roller or airless

Application Area

• Factory and production facilities
• Car parks and garage floors
• Store, showroom, cafe and restaurant floors
• Final protective varnish on epoxy
• Concrete, mosaic, stone and mineral-based floors
• Indoor and outdoor commercial applications

Surface Preparation and Application Method

Prior to application, the surface must be dry, clean, free of dust, oil and loose particles, and have a moisture content below 4%. If necessary, the surface should be primed or smoothed by sanding/grinding.

Mixing Ratio (A + B)

• 2:1 (2 parts varnish + 1 part hardener – by weight)
• If necessary, can be thinned with 5 – 10% Polyurethane Thinner

Application Instructions

• Can be applied in 1–2 coats with brush, roller or gun
• Waiting time between coats: 8 – 12 hours
• Pot life: 2 – 3 hours (at 23°C)
• Application ambient temperature: +10°C to +30°C

Area to be covered

Approximately 7 – 9 m² surface can be covered (depending on 50 – 60 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Touch dry: 4 – 6 hours
• Light foot traffic: 24 hours
• Full hardness and chemical resistance: 5 – 7 days

Packaging

• 3 kg set (2 kg Varnish + 1 kg Hardener)
• 15 kg set (10 kg Varnish + 5 kg Hardener)
• Different packaging options are available for special orders

Storage

• Store in original, closed packaging between +5°C and +30°C
• Protect from freezing and direct sunlight
• Shelf life: 12 months

Hazard Warnings

• R10: Flammable
• R20/21: Harmful by inhalation and in contact with skin
• R36/38: May cause eye and skin irritation
• R66/67: May cause dry skin and dizziness

Safety advice

• S2: Keep away from children
• S16: Keep away from fire, no smoking
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear suitable protective clothing, gloves and goggles
• S51: Use only in well-ventilated areas
• S56: Dispose of waste in accordance with environmental legislation

Application Area

• Factory and production facilities
• Parking lots and garage floors
• Store, showroom, cafe and restaurant floors
• Final protective varnish on epoxy
• Concrete, mosaic, stone and mineral-based floors
• Indoor and outdoor commercial applications

Surface Preparation and Application Method

Before application, the surface must be dry, clean, free of dust, oil and loose particles, and have a moisture content below 4%. If necessary, the surface should be primed or smoothed by sanding/grinding.

Mixing Ratio (A + B)

• 2:1 (2 parts varnish + 1 part hardener – by weight)
• If necessary, can be thinned with 5 – 10% Polyurethane Thinner

Application Instructions

• Can be applied with brush, roller or gun in 1–2 coats
• Waiting time between coats: 8 – 12 hours
• Pot life: 2 – 3 hours (at 23°C)
• Application ambient temperature: +10°C to +30°C

Area to be covered

• Approx. 7 – 9 m² surface can be covered (depending on 50 – 60 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Touch dry: 4 – 6 hours
• Light foot traffic: 24 hours
• Full hardness and chemical resistance: 5 – 7 days