Features

• A+B component, solvent-based epoxy system
• Strong adhesion to concrete surfaces
• High abrasion and impact resistance
• Resistant to chemicals and oils
• Dust-free and easy-to-clean surface
• Can be applied with non-slip additive
• Suitable for brush, roller and gun application
• Provides long-lasting performance on indoor floors

Application Area

• Industrial and production facilities
• Warehouses, workshops and maintenance areas
• Car parks and garage floors
• Food facilities (with suitable top coat systems)
• Laboratories, showrooms
• Concrete corridor and stair floors

Surface Preparation and Application Method

The surface to be applied must be dry, clean, solid and free of loose particles. If necessary, the surface must be prepared by shot blasting, sandpaper or scraper. The surface must be saturated with a suitable epoxy primer before application.

Mixing Ratio (A+B):

• 4 parts Epoxy Paint (A)
• 1 part Hardener (B)

Dilution:

• 5 – 10% Epoxy Thinner (depending on the application method)

Application Conditions:

• With roller, brush or airless gun
• Wait between coats: min. 12 hours – max. 24 hours
• Application temperature: +10°C to +30°C
• Application should not be done in environments open to humidity

Area that can be covered:

Approximately 6 – 8 m² of surface can be covered with 1 liter of mixture (varies according to film thickness and surface absorbency)

Drying Time (23°C / 50% relative humidity):

• Dust-proof: 1 – 2 hours
• Touch dry: 6 – 8 hours
• Between coats: min. 12 hours
• Suitable for light pedestrian traffic: 24 hours
• Full chemical and mechanical resistance: 7 days

Packaging

• A Component (Paint): 16 L
• B Component (Hardener): 4 L
• Total: 20 L set

Storage

• Storage should be stored in its original packaging, in a cool and dry environment between +5°C and +30°C
• Shelf life: 12 months in unopened packaging
• Storage should be kept away from sunlight and freezing conditions

Hazard Warnings

• R10: Flammable
• R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
• R36/38: Causes eye and skin irritation may
• R43: May cause allergic reactions
• R66/67: May cause dry skin and dizziness

Safety advice

• S2: Keep out of reach of children
• S16: Keep away from fire
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear suitable protective clothing, gloves and eye protection
• S51: Use only in well-ventilated areas

Application Area

• Industrial and production facilities
• Warehouses, workshops and maintenance areas
• Car parks and garage floors
• Food facilities (with suitable upper floor systems)
• Laboratories, showrooms
• Concrete corridor and stair floors

Surface Preparation and Application Method

The surface to be applied must be dry, clean, solid and free of loose particles. If necessary, the surface must be prepared by shot blasting, sanding or scraping. The surface must be saturated with a suitable epoxy primer before application.

Mixing Ratio (A+B)

• 4 parts Epoxy Paint (A)
• 1 part Hardener (B)

Dilution

5 – 10% Epoxy Thinner (depending on the application method)

Application Conditions

• With roller, brush or airless gun
• Wait between coats: min. 12 hours – max. 24 hours
• Application temperature: +10°C to +30°C
• Application should not be done in environments open to humidity

Area that can be covered

Approximately 6 – 8 m² of surface can be covered with 1 liter of mixture (varies according to film thickness and surface absorbency)

Drying Time (23°C / 50% relative humidity)

• Dust-proof: 1 – 2 hours
• Touch dry: 6 – 8 hours
• Between coats: min. 12 hours
• Suitable for light pedestrian traffic: 24 hours
• Full chemical and mechanical resistance: 7 days