Epoxy Varnish
Anasayfa >> Epoxy Group >> Epoxy Varnish

Epoxy Varnish

Become Visitor
Become Exhibitor

Epoxy Glossy Varnish is a two-component, epoxy resin-based, high-gloss, transparent and protective coating product. It is applied by mixing with amine-based hardener at a ratio of 4:1. It has high mechanical and chemical resistance; it creates a dust-proof, easy-to-clean, aesthetic and long-lasting surface. It is used as a final coat varnish on surfaces such as concrete, metal and wood in interior and closed areas.


Features

  • High gloss and glass-like surface
  • Does not yellow (UV resistance is limited)
  • Resistant to chemicals, water and oil
  • Resistant to abrasion and mechanical effects
  • Dust-proof, easy-to-clean structure
  • Transparent and decorative coating opportunity

Application Area

  • Protection and polishing of concrete and screed floors
  • As the final coat of epoxy paint systems
  • Industrial floors (factory, warehouse, parking lot)
  • Transparent protective coat on metal and wooden surfaces
  • Decorative epoxy applications (countertops, tables, etc.)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and oil-free. Loose parts, dirt and moisture must be removed. If necessary, the surface must be prepared with a suitable primer. Varnish and hardener are mixed at a ratio of 4:1, and diluted with epoxy thinner according to the application viscosity.

Mixing Ratio

  • 4 parts Epoxy Glossy Varnish
  • 1 part Epoxy Hardener
  • 5 – 10% Epoxy Thinner (depending on the application method)

Application Instructions

  • Can be applied with roller, brush or gun
  • Waiting time between coats: 8 – 12 hours
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Potency life: 4 – 6 hours (at 20°C)

Coatable Area

Approximately 8 – 10 m² of area can be covered with 1 litre of mixture (depending on 40 – 50 micron dry film thickness).

Drying Time (23°C / 50% RH)

  • Dust-proof: 2 hours
  • Touch dry: 6 – 8 hours
  • Fully dry: 7 days
  • Light traffic: 24 – 48 hours
  • Oven dry (optional): 30 minutes at 60°C

Packaging

  • Varnish: 4 kg – 20 kg
  • Hardener: 1 kg – 5 kg

Storage

Storage should be kept between +5°C and +30°C, in a cool and dry environment, away from sunlight.
Shelf life: 12 months (in original packaging, unopened)

Hazard Warnings

  • R10: Flammable
  • R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
  • R36/38: May cause eye and skin irritation
  • R43: May cause allergic reactions
  • R66/67: Dry skin and headache may cause rotation

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear suitable protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Protection and polishing of concrete and screed floors
  • As the final coat of epoxy paint systems
  • Industrial floors (factory, warehouse, car park)
  • Transparent protective coat on metal and wooden surfaces
  • Decorative epoxy applications (countertops, tables etc.)

Application Instructions

  • Can be applied with roller, brush or gun
  • Waiting time between coats: 8 – 12 hours
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Pot life: 4 – 6 hours (at 20°C)

Mixing Ratio

  • 4 parts Epoxy Glossy Varnish
  • 1 part Epoxy Hardener
  • 5 – 10% Epoxy Thinner (depending on the application method)

Area Covered

Approximately 8 – 10 m² of area can be covered with 1 liter of mixture (depending on 40 – 50 micron dry film thickness).

Drying Time (23°C / 50% RH)

  • Dust-free: 2 hours
  • Touch dry: 6 – 8 hours
  • Fully dry: 7 days
  • Light traffic: 24 – 48 hours
  • Oven dry (optional): 60°C for 30 minutes