Epoxy Matt Paint
Anasayfa >> Epoxy Group >> Epoxy Matt Paint

Epoxy Matt Paint

Become Visitor
Become Exhibitor

Epoxy Matte Paint is a two-component, epoxy resin-based, high chemical and mechanical resistance, matte-looking top coat paint. It is applied by mixing with amine-based hardener at a ratio of 4:1. It is used in industrial areas on floors and surfaces that require durability, long life and an aesthetic matte appearance. It is resistant to chemicals, solvents, water, oil and abrasion. Provides a topcoat suitable for heavy-duty conditions in interior spaces.


Features

  • Matte, non-reflective and aesthetic surface appearance
  • High chemical, mechanical and abrasion resistance
  • Resistant to water, oil and many solvents
  • Good adhesion and surface protection
  • Does not yellow (except solvent-free versions)
  • Provides long-lasting protection

Application Area

  • Factory and workshop floors
  • Storage and logistics areas
  • Food and pharmaceutical industry interior surfaces
  • Concrete, steel and galvanized surfaces
  • Automotive, machinery and equipment parts
  • Surfaces exposed to chemicals

Surface Preparation and Application Method

Application surfaces must be dry, dust-free, clean and free of oil. If necessary, a suitable epoxy primer must be applied to the surface. After mixing with the hardener, the mixture is diluted with epoxy thinner according to the application viscosity.


Packaging

  • Paint: 4 kg – 20 kg
  • Hardener: 1 kg – 5 kg

Storage

  • Storage should be between +5°C and +30°C, in a cool, dry place, away from sunlight.
  • Shelf life: 12 months (in unopened original packaging)

Hazard Warnings

  • R10: Flammable
  • R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
  • R36/38: May cause eye and skin irritation
  • R43: May cause allergic reactions
  • R66/67: Skin may cause dryness and dizziness

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear suitable protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Factory and workshop floors
  • Storage and logistics areas
  • Food and pharmaceutical industry interior surfaces
  • Concrete, steel and galvanized surfaces
  • Automotive, machinery and equipment parts
  • Surfaces exposed to chemicals

Application Instructions

  • Can be applied with roller, brush or gun
  • Waiting time between coats: 8 – 12 hours
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.5 – 1.8 mm
  • Pot life: 4 – 6 hours (at 20°C)

Mixing Ratio

  • 4 parts Epoxy Matt Paint
  • 1 part Epoxy Hardener
  • 5 – 15% Epoxy Thinner (depending on the application method)

Area Covered

Approximately 7 – 9 m² of area can be covered with 1 liter of mixture (depending on 50 – 60 micron dry film thickness).

Drying Time (23°C / 50% RH)

  • Dust-proof: 1 – 2 hours
  • Touch dry: 4 – 6 hours
  • Full dry: 7 days
  • Light traffic: 24 – 48 hours
  • Oven dry (optional): 60°C for 30 minutes