Epoxy Glossy Paint
Anasayfa >> Epoxy Group >> Epoxy Glossy Paint

Epoxy Glossy Paint

Become Visitor
Become Exhibitor

Epoxy Glossy Paint is a two-component, epoxy resin-based, high chemical and mechanical resistance, glossy-looking top coat paint. It is applied by mixing with amine-based hardener at a ratio of 4:1. It provides excellent adhesion, high gloss, resistance to chemicals and long-lasting surface protection. It is preferred in industrial facilities, factories and heavy-duty areas. Suitable for indoor applications.


Features

  • Bright and smooth surface appearance
  • High chemical, mechanical and abrasion resistance
  • Solvent, oil and water resistant structure
  • High adhesion strength
  • Does not yellow (for indoor use)
  • Long-lasting protection and aesthetic appearance

Application Area

  • Industrial floor and surface coatings
  • Factory, workshop and production areas
  • Metal constructions and equipment
  • Concrete floors, tank and warehouse surfaces
  • Food, pharmaceutical, automotive and chemical sectors
  • Indoor surfaces exposed to abrasion and chemicals

Surface Preparation and Application Method

Surfaces must be dry, clean and free from dust. Oil, dirt and loose particles must be removed from the surface. If necessary, a suitable epoxy primer must be applied. After mixing the paint and hardener in the mixing ratio, it should be diluted with epoxy thinner according to the application viscosity.


Packaging

  • Paint: 4 kg – 20 kg
  • Hardener: 1 kg – 5 kg

Storage

  • Storage should be kept between +5°C and +30°C, in a cool and dry place, away from sunlight
  • Shelf life: 12 months (in original packaging, unopened)

Hazard Warnings

  • R10: Flammable
  • R20/21/22: Harmful by inhalation, in contact with skin and if swallowed
  • R36/38: May cause eye and skin irritation
  • R43: May cause allergic reactions
  • R66/67: May cause dry skin and dizziness

Safety advice

  • S2: Keep away from children
  • S16: Keep away from fire, no smoking
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear suitable protective clothing, gloves and eye protection
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Industrial floor and surface coatings
  • Factory, workshop and production areas
  • Metal constructions and equipment
  • Concrete floors, tank and warehouse surfaces
  • Food, pharmaceutical, automotive and chemical sectors
  • Indoor surfaces exposed to abrasion and chemicals

Application Instructions

  • Can be applied with roller, brush or gun
  • Waiting time between coats: 8 – 12 hours
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.5 – 1.8 mm
  • Pot life: 4 – 6 hours (at 20°C)

Surface Preparation and Application Method

Surfaces must be dry, clean and free of dust. Oil, dirt and loose particles must be removed from the surface. If necessary, a suitable epoxy primer must be applied. After mixing the paint and hardener in the mixture ratio, they must be diluted with epoxy thinner according to the application viscosity.

Mixing Ratio

  • 4 parts Epoxy Glossy Paint
  • 1 part Epoxy Hardener
  • 5 – 15% Epoxy Thinner (depending on the application method)

Area That Can Be Covered

Approximately 7 – 9 m² of area can be covered with 1 liter of mixture
(Depending on 50 – 60 micron dry film thickness)