Features

• Primerless direct application to metal
• Strong resistance to corrosion
• Perfect adhesion to the surface
• Resistance to scratches and impacts
• Fast drying feature
• Matte, semi-matte or glossy appearance options
• Easy application with roller, brush or gun
• Can be applied in one or two layers

Application Area

• Industrial type machines and equipment
• Agricultural machines and construction machines
• Metal constructions
• Sheet metal panels, metal roof systems
• Trailers, container, chassis and body parts
• All metal surfaces exposed to corrosion

Surface Preparation and Application Method

The surface must be dry, clean and free from rust, oil and silicone residues. Loose paint residues on the surface must be removed with a wire brush or sandpaper. If necessary, the surface can be prepared by sandblasting (SA 2½).

Application Instructions:

• The single-component product is ready for immediate use
• Mixing ratio for two-component versions:
  • 4 parts DTM Paint
  • 1 part Hardener
• Can be diluted with 10 – 15% suitable thinner
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.4 – 1.6 mm
• Application viscosity: ~20 – 25 sec / DIN Cup 4 (20°C)

Area Coverable

Approx. 7 – 9 m² of area can be covered with 1 litre of the mixture (50 – 60 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Dust-proof: 15 – 30 minutes
• Touch dry: 1 – 2 hours
• Waiting time for second coat: 2 – 4 hours
• Full dry: 24 hours
• Full hardness: 5 – 7 days

Packaging

1 L – 5 L – 20 L tin packages

Storage

• In its original packaging, in a cool, dry environment away from direct sunlight
• Stored between +5°C and +30°C
• Shelf life: 12 months

Hazard Warnings

• R10: Flammable
• R36/38: May cause eye and skin irritation
• R66/67: May cause skin dryness and dizziness

Safety Recommendations

• S2: Keep away from children
• S16: Keep away from fire, smoking do not drink
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear protective clothing, gloves and eye protection
• S51: Use only in well-ventilated areas

Application Area

• Industrial type machines and equipment
• Agricultural machines and construction machines
• Metal constructions
• Sheet metal panels, metal roof systems
• Trailers, containers, chassis and body parts
• All metal surfaces exposed to corrosion

Application Instructions

• The single component product is ready for immediate use
• Mixing ratio for two component versions:
  • 4 parts DTM Paint
  • 1 part Hardener
• Can be diluted with a suitable thinner at a rate of 10 – 15%
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.4 – 1.6 mm
• Application viscosity: ~20 – 25 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface must be dry, clean and free from rust, oil, and silicone residue. Loose paint residue on the surface must be removed with a wire brush or sandpaper. If necessary, the surface can be prepared by sandblasting (SA 2½).

Area to be covered

• Approximately 7 – 9 m² of area can be covered with 1 litre of mixture
• (Depending on 50 – 60 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Dust-free: 15 – 30 minutes
• Touch dry: 1 – 2 hours
• Waiting time for second coat: 2 – 4 hours
• Full dry: 24 hours
• Full hardness: 5 – 7 days