Cellulosic Top Coat Varnish
Anasayfa >> Cellulosic Group >> Cellulosic Top Coat Varnish

Cellulosic Top Coat Varnish

Become Visitor
Become Exhibitor

Cellulosic Top Coat Varnish is a nitrocellulose and alkyd resin based, single component, air drying, high adhesion and gloss providing top coat varnish. It is used for protective and decorative purposes on wood, MDF and metal surfaces. It is especially preferred in furniture, decoration, automotive and repair works thanks to its fast drying feature. It provides a transparent and aesthetic coating on the surface thanks to its natural structure.

Features

  • Dries quickly, can be processed in a short time
  • Gives the surface a bright and transparent appearance
  • Single component, ready to use formula
  • Medium level resistance to yellowing
  • Can be sanded and re-coated
  • Easy to apply with brush and gun
  • Leaves a natural film showing the wood pattern

Packaging

  • Presented in 1 L – 3 L – 10 L metal packages

Storage

  • Storage should be stored in its original packaging, between +5°C and +30°C, in a cool and dry environment
  • Should not be exposed to freezing and direct sunlight
  • Shelf life: 12 months (in unopened packaging)

Hazard Warnings:

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness

Safety Recommendations:

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Wood and MDF surfaces (furniture, panels, interior decoration)
  • Metal surfaces (accessories, interior objects)
  • Old painted surfaces
  • Repair and touch-up processes
  • Transparent protective layer on cellulosic system

Application Instructions

  • Can be applied with a gun in 2–3 thin layers
  • Waiting time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, and free of dust, oil and silicone residue. The sub-surface must be suitable for varnish; if necessary, the filler should be smoothed with varnish or primer.

Thinning Rate

Diluted with Cellulosic Thinner at a rate of 30 – 50% (depending on the application viscosity)

Area That Can Be Covered

Approximately 8 – 10 m² of surface can be covered with 1 liter of product (depending on the dry film thickness of 30 – 40 microns)

Drying Time (23°C / 50% relative humidity):

  • Dust-free: 5 – 10 minutes
  • Touch dry: 15 – 30 minutes
  • Full dry: 2 – 3 hours
  • Ideal time for intermediate sanding: 45 minutes – 1 hour