Cellulosic Top Coat Semi-Gloss Paint
Anasayfa >> Cellulosic Group >> Cellulosic Top Coat Semi-Gloss Paint

Cellulosic Top Coat Semi-Gloss Paint

Become Visitor
Become Exhibitor

Cellulosic Final Coat Semi-Gloss Paint is a nitrocellulose and alkyd resin based, single component, fast drying and semi-gloss surface forming final coat paint. It is used to provide an aesthetic and medium level gloss appearance on wood, metal and automotive surfaces. It is the ideal choice for interior furniture, industrial and decorative painting thanks to its fast drying, practical application and natural surface effect.

Features

  • Semi-gloss surface appearance (30–50% gloss level)
  • Fast drying – provides ease of application
  • Single component and ready to use
  • Homogeneous spreading, does not leave brush marks
  • Adheres well to the surface, resistant to scratches
  • Sandable, touch-up
  • Fully compatible with cellulosic primers and varnishes

Packaging

  • Presented in 1 L – 3 L – 10 L metal packages

Storage

  • Storage should be between +5°C and +30°C, in a dry and cool environment
  • Should not be exposed to sunlight and freezing
  • Shelf life: 12 months (in unopened original packaging)

Hazard Warnings

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Instructions

  • Can be applied with a gun in 2–3 coats
  • Wait time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be smooth, dry, clean and free from dust and oil. For a good result, primer (e.g. Cellulosic Primer) should be applied beforehand and the surface should be sanded.

Thinning Rate

Diluted with Cellulosic Thinner at a rate of 30 – 50% depending on the application viscosity

Area That Can Be Covered

Approximately 8 – 10 m² of surface can be covered with 1 liter (based on 40 – 50 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

  • Dust-free: 5 – 10 minutes
  • Touch dry: 15 – 30 minutes
  • Full dry: 2 – 3 hours
  • Recoat / sand for: 45 minutes – 1 hour