Cellulosic Top Coat Glossy Paint
Anasayfa >> Cellulosic Group >> Cellulosic Top Coat Glossy Paint

Cellulosic Top Coat Glossy Paint

Become Visitor
Become Exhibitor

Cellulosic Top Coat Glossy Paint is a nitrocellulose and alkyd resin based, single component, fast drying and high gloss top coat paint. It is used to create an aesthetic and durable surface on wood, metal and automotive surfaces. It is especially preferred in the furniture, auto paint and interior decoration sectors thanks to its ease of application and high adhesion strength.

Features

  • Creates a glass-like surface (80%+ gloss)
  • Fast drying and short processing time
  • Easy to apply with a brush or gun
  • Provides excellent adhesion to the surface
  • Resistant to yellowing (short term)
  • Single component, ready-to-use system
  • Can be produced with a wide range of colors

Packaging

  • 1 L – 3 L – 10 L metal containers

Storage

  • Storage should be kept in its original packaging, between +5°C and +30°C, in a dry and cool environment
  • Protect from sunlight and freezing
  • Shelf life: 12 months (in unopened packaging)

Hazard Warnings

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Area

  • Wood and MDF furniture surfaces
  • Automotive body and spare part paintings
  • Metal coating and interior decorative surfaces
  • Industrial type equipment
  • Touch-up and repair processes
  • Any surface where gloss and aesthetic appearance is desired

Application Instructions

  • Can be applied in 2–3 coats with a gun
  • Waiting time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.3 – 1.5 mm
  • Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, and completely free of dust, oil and dirt. For best results, it is recommended to use a suitable primer (Cellulosic Primer or Filler Varnish).

Dilution Rate

Dilute with Cellulosic Thinner at a rate of 30-50% depending on the application viscosity.

Area to be Covered

Approximately 8-10 m² of surface can be covered with 1 liter of product (based on 40-50 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

  • Dust-proof: 5-10 minutes
  • Touch dry: 15-30 minutes
  • Full dry: 2-3 hours
  • Suitable for light use and processing: 6-8 hours