Cellulosic Primer
Anasayfa >> Cellulosic Group >> Cellulosic Primer

Cellulosic Primer

Become Visitor
Become Exhibitor

Cellulosic Primer is a nitrocellulose and alkyd resin based, single component, air drying filler primer. It was developed for use on metal, wood, putty and old painted surfaces. It is fully compatible with the cellulosic system and ensures that the final coat of paint to be applied on it spreads properly. Thanks to its fast drying feature, it is especially preferred in repair, auto painting and furniture sectors.

Features

  • Dries quickly, can be sanded in a short time
  • Single component and ready to use
  • Prepares a good base under paint
  • Compatible with cellulosic and acrylic paints
  • Easy to apply with a brush or gun
  • It is economical and offers practical solutions

Packaging

1 L – 3 L – 10 L metal containers

Storage

  • Storage should be between +5°C and +30°C, in a cool and dry place
  • Should not be exposed to direct sunlight and freezing
  • Shelf life: 12 months (unopened products)

Hazard warnings

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness

Safety recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application area

  • Automotive spare parts and body applications
  • Industrial type metal surfaces
  • Wood, MDF and chipboard surfaces
  • Polyester putty surfaces
  • Surface preparation for repair and touch-up purposes

Application instructions

  • Can be applied in 2–3 coats with a gun
  • Waiting time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.4 – 1.6 mm
  • Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Surface preparation and application method

The surface must be dry, clean, sanded and free of dust and oil. If necessary, correction should be made with polyester putty and it should be completely dry.

Thinning ratio

Thinned with Cellulosic Thinner at a rate of 30 – 50% (depending on the application viscosity)

Area that can be covered

Approximately 7 – 9 m² of surface can be covered with 1 liter of product (depending on 40 – 50 micron dry film thickness)

Drying time (23°C / 50% relative humidity)

  • Dust-free: 5 – 10 minutes
  • Touch dry: 15 – 20 minutes
  • Ready for sanding: 30 – 45 minutes
  • Full dry: 2 – 3 hours