Cellulosic 1K Primer
Anasayfa >> Cellulosic Group >> Cellulosic 1K Primer

Cellulosic 1K Primer

Become Visitor
Become Exhibitor

Cellulosic 1K Primer is a nitrocellulose and alkyd resin based, single component, air drying, fast drying surface primer. It is used to ensure that the final coat of paint adheres and spreads properly on metal, wood and putty surfaces. It is widely preferred especially in the body shop, auto painting and furniture sector with its easy-to-apply structure and fast drying time.

Features

  • Dries quickly, can be sanded in a short time
  • Single component, ready-to-use structure
  • Adheres well to the surface, increases paint adhesion
  • Filling power is at a medium level
  • Cellulosic and acrylic system paints can be applied on it
  • Provides economical and practical solutions

Packaging

1 L – 3 L – 10 L metal packages

Storage

  • Stored in original packaging, between +5°C and +30°C, in a cool and dry environment
  • Protect from sunlight and freezing conditions
  • Shelf life: 12 months (in unopened packaging)

Hazard Warnings

  • R10: Flammable
  • R20: Harmful if inhaled
  • R36/38: May cause eye and skin irritation
  • R66/67: May cause skin dryness and dizziness

Safety Recommendations

  • S2: Keep away from children
  • S16: Keep away from fire, do not smoke
  • S24/25: Avoid contact with eyes and skin
  • S36/37/39: Wear protective clothing, gloves and goggles
  • S51: Use only in well-ventilated areas
  • S56: Dispose of waste in accordance with environmental legislation

Application Instructions

  • Can be applied with a gun in 2–3 thin coats
  • Wait time between coats: 5 – 10 minutes
  • Gun pressure: 2 – 2.5 bar
  • Nozzle diameter: 1.4 – 1.6 mm
  • Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Application Area

  • Automotive body and spare parts primer
  • Industrial metal surface preparation
  • Wood and MDF surfaces (especially in furniture and interior decoration areas)
  • Polyester putty surfaces
  • Repair sanding primer

Surface Preparation and Application Method

The surface must be dry, clean and completely free of residue such as oil, dust, and rust. If putty is applied, make sure it is completely dry and smooth with fine sandpaper.

Thinning Rate

It is thinned with Cellulosic Thinner at a rate of 30-50% depending on the application viscosity.

Area That Can Be Covered

Approximately 7-9 m² of surface can be covered with 1 liter (according to 40-50 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

  • Does not collect dust: 5-10 minutes
  • Touch dry: 15-20 minutes
  • Ready for sanding: 30-45 minutes
  • Full dry: 2-3 hours