Application Area

• Automotive paint and repair applications (bodywork, full painting, local touch-up)
• As a decorative and protective top coat in industrial applications
• Metal, primed surfaces, putty and painted areas
• All outdoor applications where high gloss, scratch resistance and UV resistance are required

Surface Preparation and Application Method

The surface to be applied must be completely cleared of dust, dirt, oil, silicone and old paint residues. It should be applied on surfaces prepared and sanded with acrylic primer or suitable filler primer.

Mixing Ratio

3 parts varnish + 1 part hardener + 5–15% Acrylic Thinner

Application Instructions

• The prepared mixture should be rested for 10-15 minutes.
• 2-coat application is recommended (with a gun), 5–10 minutes should be allowed between coats.
• Ideal application pressure: 2–2.5 bar.
• Application viscosity: 18–22 sec / DIN4 / 20°C.

Mixing Ratio

• 3:1 (3 parts varnish + 1 part hardener)
• 5–15% Acrylic Thinner (depending on the application method)

Area that can be covered

A 1-liter mixture can cover an area of ​​8–10 m². (Two-layer application and ~50–60 micron dry film thickness are taken as basis.)

Drying Time (20°C / 50% RH)

• Dust-free: 15–20 minutes
• Touch dry: 1–2 hours
• Full dry: 12 hours
• Oven dry: 30 minutes at 60°C

Drying time may vary depending on ambient conditions.

Packaging

• 1.33 kg set (1 kg varnish + 0.33 kg hardener)
• 4 kg set (3 kg varnish + 1 kg hardener)
• 12 kg set (9 kg varnish + 3 kg hardener)

Storage

• Stored in original packaging, in a cool and dry environment between +5°C and +30°C
• Protected from sunlight and frost
• Shelf life: 12 months (in unopened packaging)

Hazard Warnings

• R10: Flammable
• R20/21: Harmful by inhalation and in contact with skin
• R36/38: May cause eye and skin irritation
• R66/67: May cause dry skin and dizziness

Safety advice

• S2: Keep away from children
• S16: Keep away from open fire, no smoking
• S24/25: Avoid contact with eyes and skin
• S36/37/39: Wear protective clothing, gloves and goggles
• S51: Use in well-ventilated areas
• S56: Dispose of waste in accordance with environmental legislation

Application Area

• Automotive painting and repair processes
• Motorcycle bodywork and plastic surfaces
• Metal, aluminum and galvanized coatings
• Wood and MDF surfaces (furniture and decorative areas)
• Protective/gloss coat on acrylic-based top coat

Application Instructions

• Can be applied in 1–2 coats with a gun
• Waiting time between coats: 5 – 10 minutes
• Gun pressure: 2 – 2.5 bar
• Nozzle diameter: 1.3 – 1.4 mm
• Application viscosity: ~18–22 sec / DIN Cup 4 (20°C)

Surface Preparation and Application Method

The surface to be applied must be dry, clean, dust-free and fully compatible with the base paint. The base coat must be completely dry and the surface must be cleaned.

Mixing Ratio (A + B):

• 3:1 (3 parts varnish + 1 part hardener)
• If necessary, dilute with Acrylic Thinner at a rate of 5 – 15%

Area to be Covered

Approximately 8 – 10 m² of surface can be covered with 1 liter of mixture
(According to 30 – 40 micron dry film thickness)

Drying Time (23°C / 50% relative humidity)

• Dust-free: 10 – 15 minutes
• Touch dry: 30 – 45 minutes
• Full dry: 6 – 8 hours
• Final hardness and shine: 24 – 48 hours